BSPNY - TECH-GARD HEAVY DUTY COATING SAFETY RED
- MSDS: BSPNY
- Manufacturer: PRATT AND LAMBERT INC
- Product Name: TECH-GARD HEAVY DUTY COATING SAFETY RED
- National Stock Number: 8010-00F031994
Product Identification
Product ID:TECH-GARD HEAVY DUTY COATING SAFETY RED
MSDS Date:02/19/1988
FSC:8010
NIIN:00F031994
MSDS Number: BSPNY
Responsible Party
BUFFALO, NY 14240
US
Emergency Phone: 716-873-6000
Info Phone: 716-873-6000
Cage: 61196
Contractor
Telephone: 216-566-2902
Cage: 61196
Ingredients
MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES
CAS: 64742-88-7
Fraction By Weight: 40%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
LEAD, INORGANIC LEAD (SUSPECTED HUMAN CARCINOGEN BY IARC,
CAS: 7439-92-1
RTECS: 9999999WG
Fraction By Weight: 7.8% LB
ACGIH TLV: 0.15 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: GASTROINTESTINAL
IRRITATION. EYES: IRRITATION, ASPIRATION HAZARD, EYES: IRRITATION.
SKIN: DEFATTING/IRRITAION. INHALATION: NOSE/THROAT IRRITATION,
CENTRAL NERVOUS SYSTEM DEPRESSION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: NAUSEA, VOMITING. INHALATION:
HEADACHES, DIZZINESS, NAUSEA, CONFUSION. ASPIRATION: MAY CAUSE
PNEUMONITIS WHICH CAN BE FATAL.
First Aid
First Aid:INGESTION: CALL POISON CONTROL CENTER/EMERGENCY
ROOM/PHYSICIAN. INHALATION: REMOVE TO FRESH AIR IMMEDIATELY. IF
BREATHING HAS STOPPED GIVE ARTIFICIAL RESPIRATION. KEEP WARM &
QUIET. EYES: FLUSH W/LARG E AMOUNTS OF WATER FOR 15 MINUTES. SKIN:
WASH AREA W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:102F
Extinguishing Media:NFPA CLASS B FIRE EXTINGUISH, CO2, DRY CHEMICAL,
ALCOHOL FOAM, POLYMER FOAM IS PREFERRED FOR LARGE FIRE.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DURING EMERGENCY CONDITIONS EVEN EXPOSURE
TO DECOMPOSTION PRODUCT IT MAY CAUSE A HEALTH HAZARD.
Accidental Release
Spill Release Procedures:KEEP SPECTATORS AWAY, ELIMINATE ALL IGNITION
SOURCES/SURFACE/SOURCES OF ELECTRICAL, STATIC/FRICTIONAL SPARK.
DIKE & CONTAIN SPILL W/INERT MATERIAL TRANFER LIQUIDS TO COVERED
METAL CONTAINER FOR RECOVE RY/DISPOSAL. REMOVE W/INERT ABSORBENT.
Handling
Handling and Storage Precautions:DO NOT STORE > 95F. STORE LARGE
QUANTITIES IN COMPLIANCE W/OSHA 29CFR1910.106. KEEP AWAY FROM
CHILDREN. DO NOT TAKE INTERNALLY.
Other Precautions:CLOSE CONTAINER AFTER EACH USE. DO NOT BREATH SANDING
DUST. EMPTY CONTAINER MUST NOT BE WASHED & RE-USE FOR ANY PURPOSE.
CONTAINERS SHOULD BE GROUNDED & BONDED TO THE RECEIVING CONTAINER.
DO NOT WELD, BRAZE/CUT EMPTY CONTAINER.
Exposure Controls
Respiratory Protection:NIOSH APPROVED MECHANICAL
Ventilation:GENERAL DILUTION/LOCAL EXHAUST
Protective Gloves:IMPERMEABLE
Eye Protection:SAFETY SPECTACIES
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING, WASH HANDS/FACE
THOROUGHLY BEFORE EATING/DRINKING.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:281-390F
Vapor Density:> THAN 1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:50
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS/ALKALINE MATERIAL
Stability Condition to Avoid:EXCESSIVE HEAT & SOURCES IGNITION
Hazardous Decomposition Products:BURNING, INCLUDING WHEN HEATED BY
WELDING/CUTTING WILL PRODUCE SMOKE/CARBON MONOXIDE/CO2/OXIDES OF
LEAD MAY BE GENERATED
Disposal
Waste Disposal Methods:INCINERATE ONLY IN EPA PERMITTED ACILITY. DON'T
INCINERATE CLOSED CONTAINERS. OBSERVE PRECAUTIONS FOR DISPOSAL OF
FLAMMABLE MATL. CONTAMINATED ABSORBANT MAY BE DISPOSED IN HAZARDOUS
WASTE LANDFILL. DI SPOSE ONLY IN ACCORDANCE W/STATE/LOCAL
REGULATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.